Smooth Fitness Car Video System GMTV15 User Manual

15” TFT LCD MONITOR  
USER MANUAL  
Model: GMTV15  
CONTENT:  
1. Unpacking  
2. Specification  
3. Important Safety Instructions  
4. Installation and Connection  
5. Front Panel Controls  
6. OSD Controls  
7. Trouble Shooting  
 
15” TFT LCD TV  
Power Cord  
ADAPTER TECH  
External Universal AC Adapter  
(100v-240v, 50/60Hz)  
User Manual  
Signal and power in integrated box  
(This parts only for Momentum T3, T5, T7  
serials and T480 serials )  
M5 × 10mm bolt 2pcs  
For fix both extra speaker  
Extra Speaker  
(option)  
Head Set  
(option)  
Remote Control  
(option)  
 
Specification  
LCD Panel  
Type  
15.0” XGA Color TFT-LCD Display  
Viewing Angle  
Contrast Ratio  
Response Time  
Display colors  
Pixels H × V  
Pixel Pitch  
H:65° V:65 °  
500 : 1 (Type)  
12ms  
16.2M colors  
1024( ×3) × 768  
0.297mm(per one triad) ×0.297mm  
Input Signals  
Connector  
Video in  
ANT*  
Auto Detect NTSC/PAL interlaced video with input  
format of Composite video (AV)  
NTSC or PAL- B/G, D/K, L/L  
Video in  
Audio in  
ANT*  
RCA - Jack  
RCA – Jack (L/R)  
RF Tuner PH Type terminal  
12V/DC Jack  
Power  
Power  
Voltage  
100v~240v, 50/60Hz(universal) via external AC  
Adapter  
Consumption  
Power saving mode  
Active < 48Watt Max  
Standby < 3Watt  
Speaker  
5W+5W (Stereo)  
User Interface  
LED Indicator  
Active  
Off  
-Green  
-Turn off  
Standby -Orange  
Operating Condition  
Temperature  
0~ 50 ℃  
Storage (Shipping)  
Air Humidity  
-20~ 60 ℃  
20% ~ 80% R.H.  
Dimensions  
Net Weight  
Physical  
321mm(H) × 590mm(W) × 108mm(D)  
5.6kg  
*ANT and Cable system will difference follow export country from manufactory.  
 
Important Safety Instructions  
1. Read instructions –  
Please make sure the instruction has been read and understood before starting using.  
2. Keep this manual precisely –  
Please keep the manual well just for once if you need it as future reference.  
3. Check warnings –  
Please check the warnings both on the product and in the manual.  
4. Follow the instructions –  
All the operating instructions must be followed.  
5. Attachments –  
Do not use attachments which has never be recommended by the manufacturer. Use of  
inadequate attachments could possibly couse accidents.  
6. Power source –  
This product must be operated on the power source specified on the specification label. If  
you are not sure about which type of power supply is used in your house, please contact with  
your dealer or local power company.  
7. Power cord protection –  
The power cord must be routed properly to prevent people from stepping on them or objects  
form resting on them. Check the cords at the plugs and product.  
8. Servicing –  
Do not attempt to repair the product by yourself. Removing covers can expose you to high  
voltage & other danger. Please request someone who has been trained and qualified to  
provide servicing.  
9. Repair –  
Please make sure you unplug the power cord and have someone who’s qualified to do the  
repairing service in the following status.  
a.  
b.  
c.  
When the AC cord of plug is damaged.  
Once if the power cord is damaged.  
When a liquid was spilled on the product or when objects have fallen into the product.  
If you have the liquid spilled out from the product or any crash causing the damage on the  
product.  
a.  
b.  
When the product has been exposed to rain or water.  
When the product does not operate properly as described in the operating instructions.Do  
not touch the controls other than those described in the operating instructions. Improper  
adjustment of controls not described in the instructions can cause damage, which often  
requires extensive adjustment work by a qualified technician.  
c.  
d.  
When the product has been dropped or damaged.  
When the product displays an abnormal condition. Any noticeable abnormality in the product  
indicates that the product needs servicing.  
 
Installation and Connection  
Type A:  
1. Use pill. driver and 5mm allen  
wrench move out both L and R  
ahead fix on treadmill parts.  
2. After installed TV support then  
cables penetrate into the hole.  
3. Use pill. driver move out cover  
on base frame.  
4. Pull two cable then connect on  
the input signal and power box  
then use original 2 bolts to fix.  
5. Achievement diagram.  
Type B:  
1. Use pill. driver and 5mm allen  
wrench as same as type  
ahead fix on treadmill parts.  
 
TV install:  
1. Attachment cable and installation both speakers with M5×10 2 bolts. (Optional)  
2. Then put TFT TV bracket on support base with M6×10 2 bolts.  
3. Connect DC in, TV cable, Video, Audio L and R.  
DC  
Video  
Cable  
Audio  
L
R
4. Plug the power cord into the wall outlet, and the other end of the power cable into  
the Adapter AC socket then plug the other end of Adapter the power input of the  
back of LCD monitor.  
5. Power on, turn on the Power Switch of your LCD monitor.  
 
Front Panel Controls  
6
5
4
3
2
1
1. Power Switch: To switch on/off device.  
2. Power LED: To display DC power in.  
3. Channel up and down: To select TV program channel.  
4. Volume up and down: To adjust speaker or earphone volume.  
5. Remote: To receive remote control signal.  
6. TV/AV: To select TV channel and AV input.  
 
OSD Controls  
1
2
3
1. Main Menu: To enter / to select item.  
2. Adjust (decrease/down): To adjust the decreasing value / to adjust decreasing item.  
3. Adjust (increase/up): To adjust the increasing value / to adjust increasing item.  
OSD Operation:  
 
1. Display OSD information: Press SELECT button to show main menu, use + and –  
to select, then press SELECT button to enter.  
2. Brightness: Use + and – button adjust the brightness then press SELECT button  
to execute and exit.  
3. Contrast: Use + and – button adjust the brightness then press SELECT button to  
execute and exit.  
4. Color: Use + and – button adjust the color then press SELECT button into select  
Red, Green, Blue select menu, select one of 3 color menu then press SELECT  
button to enter, use + and – button adjust color then press SELECT button to  
execute and exit.  
5. Recall: If adjustment not advisability to present, select Recall to reset from  
manufactory adjust value.  
 
Trouble Shooting  
1. No picture and sound :  
Is the power cable plugged? Confirm the connection of SPEAKER or AUDIO cable.  
Components connection status checking.  
2. Picture only, no sound :  
Confirm the connection of AUDIO cable. Confirm the volume.  
3. No power :  
Please confirm the device is correctly connected to the AV power cable. Is the POWER  
button pressed on the remote control? AC power cable removed form plug? Is the main  
switch on device on?  
4. Failure to operate device :  
Strong lighting source may cause operation fail, turn off the device and unplug it, wait for  
1~2 minutes then restart to operate device again.  
5. No picture :  
Confirm the component connection. Setting after connection to the component. Please  
confirm the input source. Uncompetitive signal? Please check the screen mode.  
 

Sennheiser Satellite Radio SK 1010 6 User Manual
Sennheiser Stereo Receiver HDI 830 User Manual
Singer Sewing Machine 114 31 User Manual
Sony DVD Player DAV LF1H User Manual
Sony Flat Panel Television 4 159 943 111 User Manual
Sony Headphones MT15029 User Manual
Sprint Nextel Cell Phone NNTN9124A User Manual
Stanley Black Decker Grinder FG10 User Manual
Sunbeam Microwave Oven SMW777 User Manual
Suncast Greenhouse Kit RB448 User Manual